The search criteria you have entered
(Click on any of these steps to modify related entry.)
|
Step1
Nozzle category
|
Step2
Spray pattern
|
Step3
Required specifications
|
|
Nozzles for Liquids
|
|
| Manufacturer |
:
No preference
|
| Pressure |
:
0.3±0.1 MPa
|
| Flow rate |
:
15±1.5 l/min
|
| Spray angle |
: 90±10°
|
|
|
The following product(s) match(es) the specifications you have entered
|
| Convenient functions |
| - | To display full details of this product and an image of the corresponding page from the manufacturer's printed catalog, click on the Search code No. |
| - | To display values in your preferred units, select desired units from the menus provided and click the [Display Converted Values] button. |
| | |
|
|
|
Display values shown in the table below in your preferred units.
|
|
|
|
|
|
|
| No. |
Search
code No.
Click to
display details
 |
Manufacturer
  |
Corp.
HQ. |
Cat. Lang. |
Manufacturer’s
model No.
|
Free
passage
diameter |
Pressure
|
Flow rate
|
*
Spray
angle
( at Pressure)
|
Material
(orifice)
|
Connection
Standard
Size
M/F
|
V
a
l
v
e |
S
t
r
a
i
n
e
r |
| 1 |
SGS 518-746 |
KATORI |
JPN |
jpn |
K-11-RC3/8-6.4-SUS304 |
|
2.5 kgf/cm² |
15.35 l/min |
85°(at 2.5kgf/cm²) |
Stainless Steel |
Rc 3/8 Female |
- |
- |
| 2 |
SGS 518-745 |
KATORI |
JPN |
jpn |
K-11-RC3/8-6.4-BS |
|
2.5 kgf/cm² |
15.35 l/min |
85°(at 2.5kgf/cm²) |
Brass |
Rc 3/8 Female |
- |
- |
| 3 |
SGS 388-678 |
S.S.Co. |
USA |
eng |
3/8GA-I22 |
2.8 mm |
3 bar |
16.4 l/min |
90°(at 1.5bar) *2 |
Steel |
NPT or BSPT 3/8 Female |
- |
- |
| 4 |
SGS 523-005 |
COTEC |
JPN |
jpn |
FB3-6 |
|
2 kgf/cm² |
14.3 l/min |
80°(at 2kgf/cm²) |
Brass |
G 3/8 Female |
- |
- |
| 5 |
SGS 676-313 |
Yashima |
JPN |
jpn |
3/8AS-6 |
|
4 kgf/cm² |
13.5 l/min |
85°(at 2kgf/cm²) *2 |
Plastic |
Rc 3/8 Female |
- |
- |
| 6 |
SGS 640-502 |
NIIKURA |
JPN |
jpn |
F1/2EX216L-PP |
2.25 mm |
0.2 MPa |
16 l/min |
90°(at 0.2MPa) |
Plastic |
Rc 1/2 Female |
- |
- |
| 7 |
SGS 307-633 |
LECHLER |
DEU |
eng |
422.886.30.CE |
5.7 mm |
2 bar |
16 l/min |
89° *1 *2 |
Brass |
BSPT 3/8 Male |
- |
- |
| 8 |
SGS 523-044 |
COTEC |
JPN |
jpn |
MB4-5 |
|
3.5 kgf/cm² |
15.1 l/min |
84°(at 3kgf/cm²) *2 |
Brass |
R 1/2 Male |
- |
- |
| 9 |
SGS 641-148 |
NIIKURA |
JPN |
jpn |
M1/2EX216L-SUS316L |
2.25 mm |
0.2 MPa |
16 l/min |
90°(at 0.2MPa) |
Stainless Steel |
R 1/2 Male |
- |
- |
| 10 |
SGS 676-314 |
Yashima |
JPN |
jpn |
3/8AS-9 |
|
3 kgf/cm² |
15.5 l/min |
93°(at 2kgf/cm²) *2 |
Plastic |
Rc 3/8 Female |
- |
- |
| 11 |
SGS 388-672 |
S.S.Co. |
USA |
eng |
3/8GA-22 |
2.8 mm |
3 bar |
16.4 l/min |
90°(at 1.5bar) *2 |
Brass |
NPT or BSPT 3/8 Female |
- |
- |
| 12 |
SGS 523-004 |
COTEC |
JPN |
jpn |
FB3-5 |
|
3.5 kgf/cm² |
15.1 l/min |
84°(at 3kgf/cm²) *2 |
Brass |
G 3/8 Female |
- |
- |
| 13 |
SGS 518-717 |
KATORI |
JPN |
jpn |
K-11-R3/8-4.8-BS |
|
4 kgf/cm² |
14.15 l/min |
80°(at 4kgf/cm²) |
Brass |
R 3/8 Male |
- |
- |
| 14 |
SGS 137-176 |
BETE |
USA |
eng |
3/8FWTZ39090-7 |
|
3 bar |
15.3 l/min |
90° *2 |
Stainless Steel |
NPT or BSPT 3/8 Female |
- |
- |
| 15 |
SGS 518-743 |
KATORI |
JPN |
jpn |
K-11-RC3/8-5.7-BS |
|
3 kgf/cm² |
14.5 l/min |
85°(at 3kgf/cm²) |
Brass |
Rc 3/8 Female |
- |
- |
Search result page : 1 2 3 4 5 6 7 8 9 Next
|
Please refer to the notes below if an asterisk (*), or a numbered asterisk is displayed in the table above.
|
| * |
The displayed spray angle should be regarded as being for information purposes only. While nominally constant, spray angle can, in actuality, be influenced by spray distance. Please verify the accuracy of this information by means of the manufacturer's printed catalog, or with the manufacturer.
|
| *1 |
The displayed spray angle has been calculated on the basis of spray distance and spray width values published in the manufacturer's printed catalog. These calculated values should be regarded as being for information purposes only. Please verify the accuracy of this information by means of the manufacturer's printed catalog, or with the manufacturer.
|
| *2 |
At the pressure you have entered as your search criterion, a spray angle value has not been provided in the printed catalog of the manufacturer of this product. The spray angle displayed, therefore, is at the pressure published in the catalog (this being the most useful information available).
Please verify the accuracy of this information by means of the manufacturer's printed catalog, or with the manufacturer.
|
| *3 |
The displayed flow rate/spray angle is for liquids other than water. Please verify the accuracy of this information by means of the manufacturer's printed catalog, or with the manufacturer.
|
Caution:
Although the nozzle-related information provided herein by Nozzle Network Co., Ltd. is that which is published in the printed catalogs of the manufacturers of the related items, NNC is unable to respond to queries concerning products that have been identified as a result of using the SGS. Moreover, NNC cannot be held liable for any loss or damage arising from the use of information gained through use of this service.
Please be informed, therefore, that full responsibility for verifying any information appearing in these search results lies with the user.
|
